2CSY242210R5000 ABB TR/U 1.1.ZS

Cikkszám	2CSY242210R5000
Márka	ABB
Életciklus	Aktív
szerelési mód	Surface mounting
bemeneti frekvencia	240 Pixel
hullámforma az akkumulátoron	240 Pixel
frekvencia akkumulátoros működés esetén	240 Pixel
tipikus újratöltési idő	240 Pixel
szín	240 Pixel

ABB 2CSY242210R5000 műszaki specifikációk, attribútumok, paraméterek.

The "transponder reader" is a flush-mounting device for British Standard wall boxes, designed to realize access control systems with a communication support based on KNX bus. It is equipped with one relay (4A @24 V AC/DC) and one input to be used for connecting external conventional card-holder (e.g. Zenit wiring accessories card-holder). The output can be programmed in three different ways: "Linked to access control", receiving in this case switching commands from the device itself (according to transponder card validation); being a standard KNX Switch actuator output, able to be controlled by every KNX standard devices; "linked to card-holder", that means that the relay is switched according to closing/opening internal input contact available on transponder reader. The bicolor (red-green) LED placed on the front of the device allow you to monitor device operation and can be also switched ON/OFF in the proper color according to KNX telegram (for example for DND/MUR purposes). The transponder reader can be configured with ABB Access control software in order to behave as transponder programming device. The transponder reader requires a 12...24 V AC/DC external power supply to ensure its operation even with bus voltage failure.